Are you confused about the term ‘high pressure cleaning’, Sydney? Or, have you tried it as a do-it-yourself job, only to be dissatisfied with the uneven results? Well, read on to learn exactly what it is and to discover a few tips on how the professionals do it. Before you know it, you’ll be a pro yourself in the art of high pressure cleaning, Sydney!
What is It?
There is a difference between low and high pressure cleaning and the difference, of course, surrounds the power in which the water is propelled onto the surface being cleaned. Water pressure from 34 to 70 MPa is considered to be high pressure while anything under that is low-pressure.
Low pressure cleaning is typically used for simple cleaning projects (home surfaces), but high pressure cleaning is generally used to remove materials like urethane and rubber from surfaces.
Step-by-Step
The first step is to prepare the area by removing any hazards that could cause injury (toys, gardening tools). Next, securely cover all electrical components, close all windows and doors, and wet and cover up any plants.
Next, apply the specially formulated detergent solution to the surface from the bottom up, working in sections. This will go a long way in preventing streaks.
Then, allow the detergent to sit in order to loosen the debris and work on killing surface contaminants like mould. Do not let the solution dry, but allow it to soak in for 5 to 10 minutes.
Next, spray the surface (from the top down), ensuring that all mould and dirt is cleared away. Use a rotating brush to scour heavily soiled areas.
Finally, rinse the soap and residue off, this time from the top down.
It seems like such a simple procedure, but unless it’s done right the surface will end up streaked and you’ll have to do it again.
If you just aren’t interested in the hassle of such a task, remember that there are professionals available who will clean your surfaces for you, and for a very reasonable rate. You won’t have to rent equipment or deal with the hassle of the job, and you won’t get wet!
